{{results.messages.text}}
Here are 3 international silver diamond engines. I saved these engines because they were excellent running engines and hard to find. They have transmissions attached and PTOs They turn free. $400 EACH One is a 1956 240 cubic inch, two are 1952 220 cubic inch.
{{results.messagesById['http://www.shoppok.com/youngstown/a,43,116417,International-engines----400--Hubbard-.htm?utm_source=ClazAutos&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
Engine is built with all brand new USA brand name components. This 632 has a 4.600 bore with a 4.750 stroke and is just under 16 to 1 compression ratio. Features JE gas ported coated pistons with DLC coated wrist pins with Max Seal rings gapped for dual fuel alcohol or VPC14/C12. AFR heads flow over 500 cfm and cam list is just under 1 inch. T&D full needle bearing forced oiling rockers with IS...
{{results.messagesById['https://www.racingjunk.com/BBC-complete/183050043/New-Complete-Race-Engine-BBC-632.html']}}
I have a good 5.7 hemi block and a complete set of heads from a 2003 dodge ram. Great start to a rebuild project or keep as a spare. It all needs cleaned. It was just taken out of the truck and taken apart. Essentially youll get everything except the intake and valve covers500.00 for everything Or trade for other man stuff. Just ask, worse case I say no thanksI also have other parts from anothe...
{{results.messagesById['http://www.shoppok.com/youngstown/a,43,114836,5-7-hemi-engine-block--complete-set-of-heads-and-from-a-2003-dodge-ram----500--Jefferson--ohio-.htm?utm_source=ClazAutos&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
Power: 420 HP @ 5700 RPM, 450 ft. lbs. of torque @ 4400 RPM Displacement: 383 CID Bore x Stroke: 4.040 x 3.750 Compression Ratio: 9.5:1 Block: Cast Iron, 1 piece rear seal, 4-bolt main caps with passenger side oil dip stick hole, brass freeze plugs. Crankshaft: Cast Steel, polished, stress relieved and shot peened with chamfered oil holes Connecting Rods: Heavy Beam with 150,000 psi bolts Pisto...
{{results.messagesById['https://www.racingjunk.com/SBC-complete/182910020/Base-383-Roller-Cam-Engine-420HP-450TQ.html']}}
FREE 48 State Truck Freight Shipping! Specifications: Power: 491 HP @ 5700 RPM, 509 ft. lbs. of torque @ 4400 RPM Displacement: 396 CID Bore x Stroke: 4.040 x 3.875 Compression Ratio: 10.4:1 Recommended Fuel: 91 Octane Block: Cast Iron, 1 piece rear seal, 4-bolt main caps with passenger side oil dip stick hole, brass freeze plugs. Crankshaft: Forged Steel, polished, stress relieved and shot pee...
{{results.messagesById['https://www.racingjunk.com/SBC-complete/182910457/SBC-491HP-509TQ-Forged-Long-Block-Engine.html']}}
Specifications: Power: 323 HP @ 4200 RPM, 444 ft. lbs. of torque @ 3000 RPM Displacement: 383 CID Bore x Stroke: 4.000 x 3.800 Compression Ratio: 9.1:1 Recommended Fuel: 87 Octane Block: Cast Iron, 1 piece rear seal, 4-bolt main caps Crankshaft: 4340 Forged Steel Connecting Rods: HD Powdered Metal Steel Pistons: Hypereutectic Aluminum Camshaft: Steel Hydraulic Roller Tappet Cam Lift: .431 Intak...
{{results.messagesById['https://www.racingjunk.com/SBC-complete/182962494/Brand-New-SBC-383-323HP-444TQ-Crate-Engine.html']}}
SBC 350 405HP Crate Engine EFI Polished Finish 19351532-1ET FREE 48 State Truck Freight Shipping Engine Includes: Polished finned aluminum valve covers with matching breather & PCV FiTech Fuel Injection Silver 600HP self-learning injection system Chevrolet Performance HEI distributor Spark plugs, plug wires and looms Chevrolet Performance 8 harmonic balancer Initial engine break-in on dyno prio...
{{results.messagesById['https://www.racingjunk.com/SBC-complete/182998683/SBC-350-405HP-Dyno-Tested-EFI-Engine.html']}}
Specifications: Power: 360 HP @ 5400 RPM, 380 ft. lbs. of torque @ 4200 RPM Displacement: 364 CID, 6.0L Bore x Stroke: 4.000 x 3.622 (101.6 x 92mm) Compression Ratio: 9.6:1 Recommended Fuel: 87 Octane E85 Compatible Block: Cast Iron with 6 bolt cross bolted main caps Crankshaft: Nodular Iron Connecting Rods: Powdered Metal Steel Pistons: Hypereutectic Aluminum (with polymer coating) with floati...
{{results.messagesById['https://www.racingjunk.com/LS-LT-complete/182961983/L96-6.0L-360HP-380TQ-Crate-Engine.html']}}
Ohio Speed Shops Dyno Tested LS3 500HP Deluxe Engine Package Includes: FREE 48 State Truck Freight Shipping Initial engine break-in on dyno prior to test and tuning Engine Dyno Tested and Tuned Limited 2 year / 50,000 mile parts & labor warranty for street registered/licensed vehicles New GM LS3 Crate Engine Engine harness, ecu & controller (for integrated auto trans controller add $250.00) FiT...
{{results.messagesById['https://www.racingjunk.com/LS-LT-complete/183001380/Dyno-Tested-LS3-500HP-Deluxe-Crate-Engine-Package-OSSLS35001.html']}}
Ohio Speed Shops Dyno Tested LS3 560HP Engine Package Includes: FREE 48 State Truck Freight Shipping Initial engine break-in on dyno prior to test and tuning Engine Dyno Tested and Tuned Limited 2 year / 50,000 mile parts & labor warranty for street registered/licensed vehicles New GM LS3 Crate Engine Engine harness, ecu & controller (for integrated auto trans controller add $250.00) FiTech Ult...
{{results.messagesById['https://www.racingjunk.com/LS-LT-complete/183003143/Dyno-Tested-LS3-560HP-Crate-Engine-Package-.html']}}
100% Brand New 6.2L LS3 430HP Long Block Engine Assembly This factory assembled long block makes a great base to create your own custom performance engine. LS376 430HP Long Block Engine Includes: 1-Bolt OE Camshaft (specs listed below) Stock OE oil pump Complete timing set and Tensioners Stock OE LS3 cylinder heads (specs listed below) Crankshaft position sensor Knock sensors Oil Pressure Senso...
{{results.messagesById['https://www.racingjunk.com/Long-Block/182988345/100-Brand-New-6.2L-LS3-430HP-Long-Block-Engine.html']}}
many good parts call or text
{{results.messagesById['http://www.shoppok.com/youngstown/a,43,113553,07-honda-accord-sedan-for-parts-good-2-4-vtech-engine-and-trans----1--youngstown-.htm?utm_source=ClazAutos&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
pair of trunk arm covers, fits deville dts and other gm full size cars 2000-2006 $10Northstar engine cover in good shape $15Serious inquiry only. no contact info email just gets deleted.Located in Sharon pick up in Sharon
{{results.messagesById['http://www.shoppok.com/youngstown/a,43,113566,Cadillac-northstar-engine-cover--trunk-rail-covers.htm?utm_source=ClazAutos&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
FiTech 70004 750HP EFI Intake with Engine & Trans Controller. For LS Cathedral Port Engines making up to 750HP. 4.8L, 5.3L, 5.7L, 6.0L, LS1, LS2, LS6. For 24X or 58X reluctor. Complete Self Tuning Induction Systems for LS engines designed for the do-it-yourself Hot Rodder to the professional EFI tuner! This system is ready to go with everything needed to complete the induction system of your LS...
{{results.messagesById['https://www.racingjunk.com/Other/182967460/LS-750HP-EFI-Intake-with-Engine-Trans-Controller.html']}}
This oil pan and components have been remove from a brand new, never ran GM LS3 6.2L crate engine. Pan Kit Includes: Oil Pan Oil pump pickup, tube and seal Oil dipstick & Tube Windage Tray Oil pan gasket Oil pan to block bolts Note: does NOT include, oil filter, windage tray nuts or oil pickup tube to pump bolt.. Ohio Speed Shops. 11 North Main Street NILES, OH 44446 (330) 349-4930 330-980-6996
{{results.messagesById['https://www.racingjunk.com/Oil-Pumps-Pans-System/182967440/New-GM-LS3-6.2L-Crate-Engine-Oil-Pan-Package.html']}}
3-Apr-2018Niles, OH(4 miles)Auto Parts for Sale
Blueprinted methonal. Have two engines also have frame and body. Make offer.. Niles, OH 44446 3304127574
{{results.messagesById['https://www.racingjunk.com/Engines/183014541/5-hp-Briggs-racing-engines.html']}}
*Elring Type 1 Gasket Kit W/ rear main seal * [email protected] *www.jimscustomvw.com *28years in Business
{{results.messagesById['https://www.thesamba.com/vw/classifieds/detail.php?id=901643']}}
: You are bidding on a neat oil filter adapter for most of the Ford motors in the 60's. Part is very useful in a tight area that a regular filter will not work in. I listed this item for a family member. Any questions regarding this item or for eligibility in receiving free shipping, please contact 734-658-5841. This item is also available locally for your inspection. High bidder pays shipping ...
{{results.messagesById['http://www.2040-parts.com/street-rod-ford-models-1965-engine-angle-oil-filter-adaptor-i1053695/']}}
Condition: Used This is a professionally rebuilt and detailed long block Model A engine. I have sold several of these and they are exceptional engines. You will not find a better balanced and running engine than this. Bore is .125 over Crank is .020 on the mains Rods are .020 New pistons and rings New babitted mains and rods Line bored New bushings in rods Hardened seats installed in block All ...
{{results.messagesById['http://www.2040-parts.com/professionally-rebuilt-ford-model-a-engine-i1744151/']}}
Condition: Used UPC: Does not apply This is a professionally rebuilt Model A short block. I have sold and installed several of these and they are exceptional engines. You will not find a better balanced and running engine than this. Engine degreased, painted & cylinders were rebored New pistons 060 & new rings New hardened valve seals installed in block Oversized modern valves with one piece va...
{{results.messagesById['http://www.2040-parts.com/professionally-rebuilt-ford-model-a-short-block-engine-i1946384/']}}
Post Ad